![]() Consoles with 1 network port (Windows XP consoles and ETCnomad Puck) use a default IP address in the 10.101.x.x range. x range for their second port by default. Consoles with 2 network ports (Windows 7 consoles) use the. If you have full control over all devices on the network (including the sound computer), or the sound department also use the 10.101.x.x range, it is easiest to stick with these defaults, and ensure the IP address of the QLab computer is in the same range.īut often, someone else is running sound, and they may have their own network, with their own IP address scheme. If your console has 1 network port, you will need to come to an arrangement so that the console and the QLab computer end up on the same subnet.If your console has 2 network ports (see below), use the second port to connect to the sound department, and choose an (unused!) IP address in the same subnet as their QLab computer. This may depend who has the fewest devices to readdress! Of course, if you don't use your console's network port (because you use DMX only), you can follow option 1 above. To edit the network settings on a console, exit to the shell, and go to Settings > Network. The IP address for each port is set at the top of this window. If you need to change it from the default, do so - a reboot will be required. Once this is set, scroll down to the Interface Protocols section. Ensure that UDP Strings & OSC is ticked for the port you want to use. If you're connecting to sound using your port 2, you may want to turn off sACN and Artnet for this port, to avoid spamming the sound network with level data.įor this article, we'll assume we're using Port 1 on an Eos Ti, with an IP address of 10.101.92.101. That's everything set in the shell, so hit Accept and head back into Primary. Note: If you're running Eos ETCnomad on a laptop, you will have to set the IP address in Windows or macOS, rather than in Eos. If using a Mac, use the same method as detailed below under "QLab Network Settings" If using Windows, search the web for "setting a static IP in " Convert qlab 4 to qlab 3 windows# Now that we've set everything up, it's time to send some OSC. QLab works on the basis of cue elements that are inserted into a list, including sound, video, fade and other types of cue. We need to insert a Network cue, which looks like a little bullseye target. Drag one of these into the workspace, and select it. In the Inspector dock, you will see some options for the cue. ![]() Convert qlab 4 to qlab 3 Patch#įirst, we must choose the Eos patch we created earlier in the Destination dropdown. The field below this is where you can enter your OSC message - and it can be anything, so we can have QLab send strings that Eos natively understands.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |